Snap Setter Tool | Snap Setter Instructions
Home | Shopping Cart | Login| Blog
 
 
PRODUCTS
  
   
 
OUTLET STORE
  
   
 
RETAILERS
  
   
 
RESOURCES
  
   
 
CUSTOMER SERVICE
  
   
"I just wanted to thank you for taking the time to be a real American company.  I called to say that my troller spring broke and how could I buy a new one.  Talked with a gentleman [and] within 3 days they were in my mail box at no charge.  What a blessing to have dealt with an employee and company like this.  Keep up the good work and thanks again."

–Carl 
  St. Clair Shores, MI
 

Product Resource Library → Canvas & Snap Tools → Snap Setter Instructions

Snap Setter Instructions

 

  1. Measure carefully to determine the exact spot to place the snap and make a small hole, or remove existing snap to replace.
  2. Adjust snap setter so that the punch on the upper jaw meets the anvil on the lower jaw.
  3. Place the hollow post of the boat snap through the hole in your canvas.
  4. Place the snap dome on the concave anvil of the snap setter.
  5. Place the female fitting over the hollow post. Canvas should now be sandwiched between the snap halves.
  6. Make sure that the snap halves are on the correct side of the canvas.
  7. Squeeze the handles hard to set snap.  The handles should “snap” closed when snap is riveted closed.
  8. Inspect the snap to make sure the edges of the post has rolled over enough so the snap connects firmly.


 
Home | Contact Us | About Us | Privacy Policy | Site Map
P.O. Box 1568 Lake Oswego, OR 97035
©2010, All Rights Reserved