standard E-Z Slide Trailer Slides for 4" wide bunks
review-star review-star review-star review-star review-star
4.85 stars 20 review(s).
Item #: 13

E-Z Slide trailer slides reduce friction to make launching and loading your boat a breeze.

  • Kits include plastic composite pads + stainless steel screws
  • Pads for 2", 4" & 6" wide bunks
  • 4" kits include BunkEnders to protect the end of your bunks
  • Recommended for metal boats up to 4,000 lbs. and fiberglass boats up to 1,500 lbs.
  • Five year warranty

Kits Available

Calculate how many E-Z Slides you need



    Select Color:

    Select Kit:


    QTY:

    E-Z Slide Trailer Slides

    Our E-Z Slide Trailer Slides are ideal for shallow ramps and low water launching, eliminating the need to fully submerge your trailer bunks. With E-Z Slide trailer slides, your boat easily slides off your trailer and into the water. Add a set of our patented BunkEnders for the most cost-effective protection on the market against premature carpet wear.

    Key Features of E-Z Slide Trailer Bunk Slides

    • Molded from slippery plastic composite to minimize friction between your boat and the trailer bunks when launching and loading your boat
    • Trailer bunk slides easily mount directly to your trailer bunks with included stainless screws
    • Patented BunkEnders fold over the end of the bunk to prevent carpet wear
    • All E-Z Slides and BunkEnders are 10” long
    • E-Z Slide trailer bunk slides are available in widths to fit 2”, 4” and 6” bunks
    • BunkEnders will fit both 4" or 6" wide trailer bunks
    • Available in either black or white
    • Comes with stainless steel screws for mounting
    • Recommended for metal boats up to 4,000 lbs. and fiberglass boats up to 1,500 lbs.
    • Not recommended for boats with painted bottoms
    • 5 year warranty
    • Made in USA

    How many E-Z Slide Trailer Slides do I need?

    Use this tool to calculate the number of slides you need for your boat:

    Number of bunks:
    Bunk length (in feet):

    E-Z Slides Needed:

    Note: Select the E-Z Slide width based upon your bunk widths. BunkEnders may be substituted for E-Z Slides at the end of the bunks.

    Kits Available

    E-Z Slide Kit
    Part #
    Kit Includes Bunk Size
    Kit 1
    013.0 8 E-Z slide pads - 1.5" W x 10" L
    Stainless steel screws
    2 bunks 8' L x 2" W
    Kit 2
    013.1 4 E-Z slide pads - 3" W x 10" L
    2 BunkEnders
    Stainless steel screws
    2 bunks 6' L x 4" W
    Kit 3
    013.2 8 E-Z slide pads - 3" W x 10" L
    2 BunkEnders
    Stainless steel screws
    2 bunks 10' L x 4" W
    Kit 4
    013.3 10 E-Z slide pads - 5" W x 10" L









    Stainless steel screws
    2 bunks 10' L x 6" W
    BunkEnders Only
    013.6 2 BunkEnders
    Stainless steel screws

    4" or 6" wide

    E-Z Slide & BunkEnder Resources

    Learn why E-Z Slide bunk slicks are ideal for shallow ramps and low water launching, and how BunkEnders offer cost-effective protection against premature carpet wear on your trailer bunks. The following articles and video present the benefits of using our E-Z Slide bunk slicks and BunkEnders and answer questions about installation and maintenance.

    Q. What are the E-Z slides and BunkEnders made from?
    The E-Z Slides and BunkEnders are molded from a slippery plastic composite.

    Q. How far apart should I place my E-Z slides?
    The E-Z Slides should be placed approximately 12”-18" apart.

    Q. What are the weight restrictions for using the E-Z slides?
    E-Z Slides are recommended for metal boats up to 4,000 lbs. and fiberglass boats up to 1,500 lbs. At weights over 1,500 lbs. the pressure of the slides against the fiberglass hull can crack fiberglass gel coat.

    Q. Can I use E-Z Slides with a Painted Bottom Boat?
    It is not recommended. While the pads will slide fine on a painted bottom, they may abrade or scratch the bottom paint where it contacts the slides.

    Q. Can I use E-Z Slides with a riveted metal boat?
    Yes, E-Z Slides work fine with riveted metal boats up to 4000 lbs.

    Q. How do I mount the E-Z Slides and BunkEnders?
    The E-Z Slides and BunkEnders mount directly to your trailer bunks, over carpeted or bare bunks. Drill 1/8" pilot hole through one of the mounting holes and attach the pad with a stainless steel screw (supplied). Make sure other end of pad is flushed with the bunk and repeat. Do not over-tighten screw - as damage to the trailer slide may result. Be sure that the screw head is level and fully set into the screw well so that the head is below the surface of the pad. Screw heads on an improperly installed trailer slide can scratch or gouge the bottom of your boat.

    Q. What size trailer bunks will the E-Z slides fit?
    The E-Z Slides are available in sizes to fit bunks 2”, 4” and 6” wide. E-Z Slides come in three widths: 1.5", 3" and 5".

    Q. What size trailer bunks will the BunkEnders fit?
    BunkEnders are 3” wide and are for bunks 4” or 6” wide. On 6” wide bunks, mount your E-Z Slides on the inner edge of the end of the bunk where the most contact and wear occur.

    The E-Z Slides and BunkEnders will enable boats to slide on and off bunk trailers more easily and protect your bunks from wear. They are molded from a slippery plastic composite and will mount directly to existing bunks.

    The E-Z Slides and BunkEnders are not designed for use with every boat and may damage the boat’s bottom if used inappropriately.

    Please read the following usage guidelines before mounting the E-Z Slides or BunkEnders to your trailer.

    E-Z Slides and BunkEnders are recommended for the following:

    • All metal boats with an unpainted bottom
    • Fiberglass boats weighing less than 1,500 pounds (boat and motor combined weight).

    Welded metal boats with painted bottoms may experience paint wear or scuffing in those areas contacting the pads, similar to normal wear that can occur with carpeted bunks.

    Fiberglass boats weighing more than 1,500 pounds may experience surface damage to their gel coat finish in those areas coming in contact with the pads.

    Owners using the E-Z Slides and BunkEnders do so strictly at their own risk. Ironwood Pacific Outdoors, Inc. will accept no claims for any damage to these boats.

    Before launching your boat from a trailer mounted with E-Z Slide and BunkEnder Pads be sure to attach a line to the boat so that it can be controlled from the dock or shore. Do not remove the winch line until the boat is in the water. The boat must be tied down securely when transporting on a trailer mounted with E-Z Slide or BunkEnder Pads.

    The boat must be removed from the trailer before installing. The E-Z Slides and BunkEnders may be installed over the bunk carpet or directly to the bunks. Make sure that the wood in the bunks is not rotten before installing the pads.

    Confirm that you have enough slides to adequately cover the bunks. The pads should be spaced 12” – 18” apart on the bunks.

    1. Position the first pad (EZ Slide or BunkEnder), smooth side up, at the end of the bunk with the end of the pad flush with the end of the bunk. Drill a 1/8” pilot hole through one of the mounting holes and attach the pad with a stainless screw (supplied). The screw must be tightened by hand as over-tightening may damage the pad. Before drilling the second pilot hole, be sure that the pad is resting flat against the bunk. Drill the second pilot hole and secure the pad with another screw. The screws should be seated snugly in the molded holes and the screw heads should be well below the surface of the pads (to prevent scratching of the boat hull).
    2. Position the second pad at the other end of the bunk. Secure as described in Step 1 with stainless steel screws.
    3. Evenly space the remaining E-Z Slide Pads between the ends of the bunk and secure to bunks with the remaining stainless screws. The pads should be spaced 12”-18” apart, with heavier boats requiring closer spacing.
    4. Repeat the procedure for the other bunk(s).
    5. Check all pads to ensure that they are securely fastened and the screw heads are below the surface of the pad.

    The pads should be wiped clean of road grit each time before loading the boat. Inspect the pads to ensure that the pads are secure, the screws remain tight, and that no undue wear is occurring on the pads. The pads should be removed if undue wear is occurring on the pads or on the boat.

    The E-Z Slides and BunkEnders are warranted against defects in material and workmanship under normal use for a period of five years. If the product fails due to defects in material or workmanship, return the damaged item to us along with the original dated receipt. Your repaired item or replacement product will be returned to you postpaid.

    Send to: Ironwood Pacific Outdoors, Inc. | PO Box 1568 | Lake Oswego, OR 97035

    In no event will Ironwood Pacific Outdoors, Inc. be liable to the purchaser or other party for damages to the boat and/or trailer, lost savings or profits, or other damages arising out of use or inability to use the product.

    If you have additional questions, would like more information on E-Z slides, or need help selecting the best product for your boat, please contact us. We will be glad to help!

    Shipping Information

    * All items shipped via Fedex Ground require a signature upon receipt.  To arrange a delivery time or drop off location for your shipment you can register with Fedex Delivery Manager and provide your tracking information.

    We offer free shipping on all orders within the Continental United States. Items purchased through the Ironwood Pacific website are typically processed and ready for shipment within 1-2 business days. During the summer months (or right before a holiday) this could change to 3-4 processing days. Please call to confirm current lead times before placing your order.

    For orders within the lower 48 states, we ship with either FedEx or USPS ground. Please call for available express options and applicable shipping charges. There is no sales tax in Oregon, so we do not charge sales tax on U.S. orders, regardless of your destination.

    For shipments to destinations outside the continental United States, we will be happy to provide you with a quote. Please complete our Shipping Quote Request form.

    Typical FedEx Ground Transit Time for Products in Business Days


    ipo shipping map

    4.85 stars, based on 20 reviews . |
    Overall Customer Rating of 20 Reviews:
    review-star review-star review-star review-star review-star
    AZ

    2008 16' Fisher

    Rating:
    review-star review-star review-star review-star review-star
    Pros:
    • Easy to install.
    • Did not require carpet.
    • Ordering was easy.
    • Shipping was fast.
    • Worth the Price.
    • Made boating fun again.
    Cons:
    Two improvements I made to the trailer improved loading and unloading the boat considerably. One is the Ironwood Pacific product EZ Slide. The launch ramps at the lake I fish are what I consider shallow which required me to back the trailer farther into the water than I would like. I could not load the boat by myself without wadding into 50 degree water.
    I took new 2X4's to change out the bunks, the EZ Slide Kit and tools to the boat ramp. I Launched and tied off the boat, parked the truck and trailer and went to work. The job only required a few tools - cordless drill, Phillips screw driver, socket set and drill bits. I left enough space between the sections if more were needed. The kit recommended for the length of my bunks proved to be enough. I only intended to do the installation on this trip but once in the water I decided to wet a line. On the 4th cast I hooked and nice 4 lb, or so, Small Mouth. I Returned to the ramp and boating became a whole new experience.
    I am still improving the procedure but I can now keep the back of the truck just out of the water so I do not have to get my feet wet. With new side guide bunks I can line up the boat and it glides up the support bunks, EZ Sides, with the greatest of ease, All I have to do is reach over and attach the hook with less of the aft in the water. I can climb over the bow and off the trailer tongue without getting my feet wet. With only a couple of cranks it is locked into the front roller and the boat comes out of the water correctly aligned the first time.
    It was never fun loading with a strong cross wind but it is much much easier with the addition of the EZ Slides. This is not my first boat but the first I installed EZ Slides to the trailer. If I get another boat the first item to improve it will be EZ Slides

    GA

    Rating:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Does what it is suppose to do. Easy to install, no problems. As long as you don't use power drill and tighten too tight, you will never have a problem.
    Glad I bought them. Shipping was quick also.

    Oregon

    Slides

    Rating:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Appear to be great quality, slides and hardware. The Bunkenders do a great job of protecting the end of the bunks. Shipped fast and complete!

    NORTH CAROLINA

    super slick

    Rating:
    review-star review-star review-star review-star review-star
    Pros:
    • price
    • ease of application
    Cons:
    • none
    I put these on my carpeted trailer bunks and couldnt believe the difference. launching boat now seems like its on greased rails. I would definitely recommend these.

    CA

    Great Company

    Rating:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Very pleased with items ordered and received. True to sellers description.
    Best price around.